China HP-R Engine Sinopec Grease Great Wall Lubricant
HP-R Engine Sinopec Grease introduction:
Great Wall brand HP-R grease has good extreme pressure and
anti-wear properties, which can meet the lubrication of heavy-duty
automobile wheel hub bearings. At the same time, it has good
high-temperature performance and strong high-temperature adhesion,
which can ensure a good lubricating oil film. Great Wall brand HP-R
grease also has good colloidal stability, long grease service life,
can extend the grease change cycle and good water resistance and
protective properties.
| Analysis Project | Test results |
| Exterior | Blue uniform ointment |
| Corrosion (T2 copper, 100℃, 24h) | There is no green or black change
in the copper sheet |
Oil separation by steel mesh (100℃, 30h),
% (m/m) | 0.20 |
The difference between the extended working cone penetration
(100,000 times) and the working cone penetration
,0.lmm | 26.00 |
| Dropping Point | 295℃ |
| Leakage amount (160℃, 20h), g | 1.5 |
| Evaporation loss(99℃,22h),%(m/m) | 0.47 |
| Water leaching loss (79℃, 1h), % (m/m) | 2 |
Extreme pressure performance (Timken
method) OK value, N | 178 |
Anti-wear performance (four-ball machine method)
Wear scar diameter (392N, 60min), mm | 0.5 |
| Oxidation stability (99℃, 100h, 758KPa), pressure drop, kPa | 19 |
| Low temperature torque Low temperature torque (-30℃), N·m | 4.8 |
Impurities (Microscopic Method)
25μm or more, pieces/cm^3
Above 75μm, pieces/cm^3
125 μm or more, pieces/cm^3 |
120
0
0 |
| High temperature bearing life (160℃), h | 80 |
| |
Support and Services:
Great Wall Turbine Oil Technical Support and Service
Great Wall Turbine Oil is committed to providing the highest
quality technical support and service to our customers. Our
experienced staff of professionals is available to answer any
questions you may have about our products and services.
Our technical support team is available 24/7 to provide prompt and
accurate advice on the use of our products. We also offer
troubleshooting and maintenance services to ensure that your
equipment is running at its best.
We strive to provide the best customer service possible. Our team
is available to answer any questions and help you get the most out
of your Great Wall Turbine Oil products. If you have any questions
about our products or services, please do not hesitate to contact
us.
Packing and Shipping:
Great Wall Turbine Oil Packaging and Shipping
- All orders of Great Wall Turbine Oil are packaged in 25 liter or
200 liter barrels, according to customer requirements.
- The barrels are shipped using standard road freight.
- The barrels are lined with plastic film to prevent leakage during
transport.
- The barrels are securely strapped to the pallets to prevent them
from falling during transport.
- The barrels are labeled with product information, including batch
number, manufacturing date and expiration date.
FAQ:
Q1: What is the brand name of the product?
A1: The brand name of the product is Grease.
Q2: What is the model number of the product?
A2: The model number of the product is HP-R Engine Sinopec Grease.
Q3: Where is the product manufactured?
A3: The product is manufactured in China.
Q4: What is the minimum order quantity of the product?
A4: The minimum order quantity of the product is 15KG.
